http://www.madeinwst.com
Home > Products > Spiral Plate Heat Exchanger > Spiral plate heat exchanger

Spiral plate heat exchanger

    Payment Type: L/C,T/T
    Incoterm: FOB
    Min. Order: 1 Bag/Bags
Basic Info

Model No.1-1000m²

BrandWST

1-1000m²H=4500

Additional Info

PackagingWooden box

Productivity1000

TransportationOcean

Place of Originchina

Supply Ability10000

CertificateISO9001 ASME PED

Payment TypeL/C,T/T

IncotermFOB

Product Description
The Spiral Plate Heat Exchanger is divided into a detachable spiral plate Heat Exchanger and a non detachable spiral plate heat exchanger.  The structure of detachable spiral heat exchanger is relatively simple, both ends of the spiral channel all welding die. Detachable spiral heat exchanger. In addition to the spiral channel
Spiral plate heat exchanger
Spiral plate heat exchanger
Outside the seal structure at both ends of the other with the same detachable.  In order to achieve the purpose of cleaning machinery, detachable spiral channel, open end, with a flat cap and gasket seal, to prevent fluid leakage of fluid to short-circuit the atmosphere or the same channel within the.  In order to improve the bearing capacity of the spiral plate, a fixed distance column support is used between the plate and the plate.  There are two kinds of fluid inlet and outlet in the cylinder, which are normal and tangential nozzles.  It is widely used in China, which has a small fluid resistance and is easy to be rushed out.  The utility model has the advantages of convenient use, and can make the heat exchanger stand vertically or horizontally.  Both sides of the A, B heat transfer fluid respectively through the spiral plate, wherein a fluid along the screw channel from the outside to the inside, to the central outlet; and another fluid along a spiral channel by center of imports, from outside to inside and out.  Two kinds of fluid flow in pure countercurrent. The maximum size of the spiral plate heat exchanger is: plate width 1800 mm, outer diameter of 1700 mm, heat transfer area of 250 square meters, the distance between the plate and the plate of 20 mm. Maximum allowable operating pressure up to 2.5 mpa. The working temperature is determined by the choice of materials, mostly carbon steel, stainless steel, aluminum, copper and titanium.

Product Categories : Spiral Plate Heat Exchanger

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
VIVI Ms. VIVI
What can I do for you?
Contact Supplier